ALFISO CASTERTIPS   ALFISO produce high quality castertips, completely inorganic and zero shrinckage at 800°C, for application in the continuous aluminium strip casting, available for every type of twin roll thin strip caster being used today. AT450 is refractory ceramic fiber soft tip made from shot free fiber, provides high performance in manufacture of the finest grades of medical, food and packaging foils. AT650 is refractory ceramic fiber hard tip made from shot free fiber, filler and inorganic binder, exhibits excellent strength, smooth surfaces and uniform consistency.   ALFISO castertips with excellent non-wetting properties, low thermal conductivity, high temperature stabilities, uniform density, smooth surfaces and close tolerance, is superior products for continuous aluminium strip casting.   PROPERTIES  AT450  AT650 Typical Composition, wt %  Al2O3 SiO2 40 59 58 42 Loss on Ignition, % 0 0 Density, (kg/m3) 450 650 Linear Shrinkage %  (24 hrs) 800°C 1100°C  0 2.6  0 2.4     TYPICAL SIZES Type A B C D E R1 R2 R3 X Y L 1 311 187 - 19.6 3 496 - - - - 1080 2 210 87 14.5 22.1 1.7 330 30 40 45.5 82 330 3 210 87 20 22.1 1.7 330 30 40 45.5 82 330,350,500 4 324 97 22.1 15.2 2 495 - (6,7?/span>) 50 114 1345 5 225 125 - 20 2 330 - - - - 400 6 320 233 15 21 4 330 -   - - 1190     Bookmark this page!   Data are base on average test results conducted under standard procedures and are subject to variation on individual test. This  information is for illustrative purposes only and is not intended to create any contractual obligation. For additional information of product performance or to identify the recommended product for your application, please contact ALFISO..   TANGSHAN ALFISO REFRACTORY FIBER CO., LTD. Lutai Economic-Technological  Development Area, Ninghe, Tianjin, China 301505 Tel:+86-22-69386101/02 Fax:69386100  eMail: info@alfiso.com			Back to Home About Us Products Product Line Photo Gallery Event Feedback
		© 2006 ALFISO