ALFISO ISOFOAM V22 Isofoam V22 is a pourable mass which is expanding up to 90% during getting hard.It is based on a hydraulic binder,ceramic fillings and a inorganic fillings and a inorganic drift medium.V22 will be delivered in 2 components. You have to mix the liquid component B continuous into the solid component A. You can do this Mixing relation depends on use; from A:B=1:1.34 up to 1:1. You can store material in closely packed canes for min.6 months by temperatures exceed 5℃.   Characteristics V22 Continuos temperature 1000℃ Linear shrinkage(1000³>C/5h) 2-3% density(dry) 700+/-10% g/dm3 Chemical analysis (dry) G % Al2O2 CaO 92.5 7 Thermal Conductivity Temperature W/mK 20℃ 0.22 200℃ 0.28 400℃ 0.37 600℃ 0.46 800℃ 0.58 Bookmark this page!   Data are base on average test results conducted under standard procedures and are subject to variation on individual test. This  information is for illustrative purposes only and is not intended to create any contractual obligation. For additional information of product performance or to identify the recommended product for your application, please contact ALFISO.   TANGSHAN ALFISO REFRACTORY FIBER CO., LTD. Lutai Economic-Technological  Development Area, Ninghe, Tianjin, China 301505 Tel:+86-22-69386101/02 Fax:69386100  eMail: info@alfiso.com			Back to Home About Us Products Product Line Photo Gallery Event Feedback
		© 2006 ALFISO