ALFISO ISOTEK ROUND BRAID GENERAL INFORMATION ISOTEK Round braid is dense, resilient, high performance ceramic fiber material fabricated from ceramic fiber yarn braided around a core of ceramic fiber rope to form a packing in round section. It is widely used for a broad variety of high temperature gasketing, packing and sealing application.   ISOTEK Round braid contains approximately 18% organic fiber which burns out at high temperatures, causing some smoking and outgassing, but has no effect on the properties of the products.   PROPERTIES Products ISOTEK 1260 ISOTEK 1430 Max. Temp. Rating 1260°C 1430°C Melting Point 1760°C 1740°C Temperature Limit of insert Glass: 650°C Steel: 1100°C Alloy Wire: 1300°C Ceramic Fiber Composition Al2O3 SiO2 ZrO2                                 46% 53%   28-32%  52-56%  14-18% Diameter of Ceramic Fiber 3-4 micron 3-4 micron Thermal Conductivity <0.18 W/m°K at 1000°C <0.18 W/m°K at 1000°C Shrinkage (24hr) 3% at 1150°C 3% at 1350°C Loss on Ignition 18% 18% Electrical    Glass: Non-Conductive Steel: Conductive Alloy Wire: Conductive Density 480-650kg/m³ 520-700kg/m³ Color White White   TYPICAL APPLICATIONS Asbestos packing replacement Fireproof wrap and insulation Radiant tube packing for heat-treat furnaces Seals for stoves and ovens Expansion joint packing Bulb in tadpole gaskets Gaskets and seals ADVANTAGES Flexibility Asbestos free High strength Low thermal conductivity Thermal shock resistance High temperature stability Good dielectric strength Corrosion resistance AVAILABILITY  Diameter: 6 - 50mm (1/4" to 2") Custom sizes available upon request. Bookmark this page! Data are base on average test results conducted under standard procedures and are subject to variation on individual test. This  information is for illustrative purposes only and is not intended to create any contractual obligation. For additional information of product performance or to identify the recommended product for your application, please contact ALFISO   TANGSHAN ALFISO REFRACTORY FIBER CO., LTD. Lutai Economic-Technological  Development Area, Ninghe, Tianjin, China 301505 Tel:+86-22-69386101/02 Fax:69386100  eMail: info@alfiso.com			Back to Home About Us Products Product Line Photo Gallery Event Feedback
		© 2006 ALFISO