ALFISO HIGH TEMPERATURE COATING

ALFISO^™ High Temperature Coatings

ALFISO refractory coatings are designed to provide a protective surface layer over ceramic fiber products, to resist chemical attack, mechanical wear, high gas velocity or non-wetting treatment against aluminium, brass or bronze alloys. Coating 1500A: Protective coating for ceramic fiber products against mechanical wear or high gas velocity in furnaces.

► Coating 1500E: Same application as 1500A, with lower viscosity, provides thin coating.
► Coating 1500N: Same application as 1500A, but without organic composites.
► Coating BS: Coating for launder or other ALFISO vacuum formed products for aluminium applications.
► Coating BS4: Coating for launder or other ALFISO vacuum formed products for aluminium applications, suitable for special alloys if the content of Mg or Na is high

Pail Packing 22.5kg

Typical Properties

Characteristics

1500A

1500E

1500N

BS4

Continuous temperature limit

1500

Bulk density (dry) [kg/m³]

1600

Typical chemical analysis[%]

Al₂O₃

88 %

84%

88%

62%

83.8%

SiO₂

10.5 %

16%

10.5%

21.5%

BaSO4

16.0%

14.5%

Organic fraction

(1.2%)

(1.0%)

(0.5%)

(0.6%)

Quick Links: frequent use refractory products for furnaces, kilns, kiln cars, ovens, heaters, incinerators, chimney, heat exchangers, gas pipe, duct...